Page
12
of
27
10.
Headphone Socket
This 6.35mm (1/4”) tip ring sleeve (TRS) jack socket provides a stereo output
for monitoring the mix/ solo buss.
Inserting a jack into this socket will cut the internal LS, the analogue and
AES3 audio outputs and any network audio outputs affected by the cut circuit.
It is suitable of use with headphones with impedances of 100
– 2000 Ohms.
11.
Right Panel Loudspeaker
This internal loudspeaker is fed audio from the right output of the mix/ solo mix
buss. The front panel overall level control adjusts its volume and the front
panel Cut & Dim switches also affect it.
There is a rear panel GPI that can turn the internal loudspeakers off.
Inserting a headphone jack in the headphone socket also turns the
loudspeaker off.
Summary of Contents for Dante BELLA 32
Page 25: ...Page 25 of 27 SPECIFICATIONS...
