Page
19
of
26
J. Mute LS
Mute LS, this control is either on or off. It turns the front panel loudspeaker on or off
and is normally used when the operator is wanting to operate from headset and
audio coming from the loudspeaker would disturb the local environment.
Note: LS Dim is not available on the beltpack B4.
K. Save Preset
There are 4 presets available. If you select a preset (1 – 4) and push the volume/
setup knob then all the current settings will be saved to that position in non-volatile
memory. If there was a previously saved preset on the same preset number this will
be overwritten.
Please note the preset only saves configurations available via the menu system, it
does not save any Dante network information.
