Page 19 of 27
MENU & SETTING OPTIONS
Note: Options are described for the ADDA1 but facilities and control scale down
to the ADC1 and the DAC1.
ENTERING SETUP
To enter setup press and hold the yellow ‘SELECT’ switch for about 5 seconds.
MOVING BETWEEN MENUS
There are 11 different menus whose parameters can be set. To move to the next menu just
press the yellow ‘SELECT’ switch.
ALTERING THE PARAMETERS OF THE SELECTED MENU
Once you’ve selected the menu that you wish to alter, pressing the blue up/ down arrow
buttons toggle through all available options for that menu.
Once you’ve selected the setting that you want pressing the yellow ‘SELECT’ switch sets that
setting and moves the menu to the next item.
LEAVING SETUP
To leave setup press the green ‘DONE’ button at any time.
DAC Output Level
This sets the analogue output level in reference to digital full scale (0dBFS). There are 4
options of 0dBFS equalling:
A)
+18dBu
B)
+12dBu
C)
+6dBu
D)
0dBu
