Page 18 of 27
10. Word Clock Sync Input
This BNC input can be connected to external word clocks to allow the output sample
frequency of the analogue to digital converter to be synced with the external word clock
reference frequency.
11. AES (DARS) Clock Sync Input
This balanced digital audio input can be connected to external digital sources to allow the
output sample frequency of the analogue to digital converter to be synced with the external
source frequency. This input could come from a digital output from a device that is required
to be used as the master clock. This type of digital clock input is sometimes referred to as
DARS (Digital Audio Reference Signal).
12. Unbalanced Analogue Input
This stereo pair of unbalanced analogue inputs are on RCA phono connectors. They feed the
input to the analogue to digital converter (ADC). A setting in the menu selects if this
unbalanced input or the balanced input is used as the source of the ADC.
13. Balanced Analogue Input
This stereo pair of balanced analogue inputs on Neutrik XLR connectors. They are
electronically balanced with low noise wide band audio circuits. They feed the input to the
analogue to digital converter (ADC). A setting in the menu selects if this balanced input or the
unbalanced input is used as the source of the ADC.
14. Digital Outputs
There are 3 digital outputs all of which share the same audio source (the balanced or
unbalanced analogue inputs). The 3 outputs are:
A)
Balanced AES3 on XLR
B)
S/PDIF (Sony /Philips Digital Interface Format on RCA Phono
C)
Toslink (Toshiba Link) optical interface
15. Digital Inputs
There are 3 digital inputs only one of these inputs will be routed to the digital to analogue
converter (DAC), this can be set in the setup menu. The 3 intputs are:
D)
Balanced AES3 on XLR
E)
S/PDIF (Sony /Philips Digital Interface Format on RCA Phono
F)
Toslink (Toshiba Link) optical interface
