AP72-01 Page 3 Issue 6
ATH
Hang Up
This command can be used to "hang up" the Terminal Adaptor.
ATI
Identify
Parameters:
3,4
Returns information about the Terminal Adaptor.
ATQ
Quiet (Message Control)
Default:
0
Switches result messages on or off.
ATQ0
Result messages will be displayed.
ATQ1
Result messages will not be displayed.
ATS
Set or Read S Registers
Parameters:
r=n,r?
ATS is used to set or read the Terminal Adaptor's registers. Setting a register requires
two parameters, r, which is the register to set and n, which is the value to set the register to.
A register may be read by naming register and following it by a question mark.
Example 1:
ATS0? will display the contents of register 0.
Example 2: ATS0= 1 will set register 0-1.
ATV
Result Code Form
Default:
1
Controls the format of result messages from the Terminal Adaptor.
ATV0
Result codes displayed in numeric format
ATV1
Result codes displayed in word format.
