Glenair 050-352, Instructions Manual

Page: 2 / 15

©2015 Glenair, Inc. REV: 9 US Cage Code 06324 Printed in USA
GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912
www.glenair.com
PAGE 2 of 15
E-mail: sales@glenair.com
050-352 Product Brief
PCB Mount Transceiver
10 Mbps
– 200 Mbps, SMF, 3.3V
PCB Mount Fiber Optic Transceiver, 10Mbps-200Mbps, SMF, 3.3V
Glenair 050-352, is a ruggedized harsh environment PCB Mount Transceiver
with electrical and optical functionality equivalent to SFP transceivers but with
mechanical design that is suited to the harsh temperature and vibration environments
found in Military, Aerospace, Railway, Oil and Gas, and Industrial applications. The
PCB mount optical transceivers also support optional Digital Monitoring Interface (DMI)
features in accordance with SFF 8472. The Transceiver is comprised of a transmitter
section and a receiver section that resides on a common package and interface with a
host board through a high speed electrical connector.
The transmitter section includes the Transmitter Optical Subassembly (TOSA)
and Laser driver circuitry. The TOSA, containing a 1310nm FP laser is located at the
optical interface and mates with the GC optical connector. The TOSA is driven by a
laser driver, which converts differential logic signals into an analog drive current.
The receiver section includes the Receiver Optical Subassembly (ROSA) and
amplification/quantization circuitry. The ROSA, containing a PIN photodiode and trans-
impedance preamplifier, is located at the optical interface and mates with the GC
optical connector. The ROSA is mated to a limiting amplifier IC that provides post-
amplification and quantization. Also included is a Loss Of Signal (LOS) detection
circuit.
HOW TO ORDER Table 1 Part Number Development Options
Part Number Two Wire Address Data Rate Temperature** Screw Length**
(Mod Code)
050-352
PCB Mount
Transceiver, SMF,
1310nm Blank = A2h
Other Options:
C0, C2, C4, C6, C8,
CA, CC, CE, D0, D2,
D4, D6, D8, DA, DC,
DE -1-D = 10 Mbps - 200 Mbps Blank = Standard Blank = Standard
-954-xxx = IAW Mod
Code 954
-954A-xxx = IAW Mod
Code 954A
Example: 050-352C0-1-D
PCB Mount Transceiver, SMF, 1310nm, Two Wire Address = C0h, Data Rate = 10 Mbps
– 200 Mbps,
Standard Temperature Range, Standard Screw Length
**Temperature and Screw Length Mod Codes will not be added onto Digital Memory ID (See Table 9)
KEY FEATURES/BENEFITS

SFP Compatible Electrical I/O signal levels

1310nm FP laser to support up to 200Mbps

PIN PD to support high sensitivity up to 200Mbps

Glenair Rugged GC Optical connector

High Operational Shock (650 g) &
Vibration (54 g rms)
– test reports available

Transceiver is securely mounted with screws to
PCB to ensure excellent shock and vibration
performance

High-Speed Electrical plug-in connector eliminates
the need for soldering & enables ease of servicing

Captive screws to simplify logistics and assembly
 Compact size: Approx 0.8” x 0.9” x 0.5”

-40 ° C to +85 ° C Operating Case Temperature

Glenair fiber jumpers connect from transceiver to
any Glenair Mil/Aero Fiber Optic Connector Style

Evaluation fixtures available

Optional Digital Diagnostic and Monitoring (DMI)
based on SFF-8472, enables monitoring of:
o
TX optical power, Laser bias current,
Temperature, Supply voltage
APPLICATIONS

Harsh Environment such as: Airborne, Tactical,
Railway, Industrial, Oil and Gas and Shipboard
applications
o
Ethernet, Fast Ethernet, FDDI