Identifying Your Water Heater
Dear Customer,
We congratulate you on choosing a GLEN Electric Water Heater.
Meticulously designed, using only the highest quality materials and
components, your electric water heater have many years of trouble free
service.
To enable your electric water heater to give you many years of perfect trouble
free service, we recommend you to follow the instructions of the service
manual carefully.
Wall Mounting Accessories
Drain Pipe
Installing Your Water Heater
1. Make sure that the wall can
withstand at least twice the weight
of the water heater when completely
filled with water.
2. Before locating the position for
installation of the water heater,
make sure that there is sufficient
clearance between the ceiling and
the side wall.
3. Use a drill bit with diameter of 5mm
to drill 4 holes at least 40mm deep
in the wall. The four holes should be
aligned horizontally. The horizontal
distance between the 2 holes should
be 90 mm.
4. Insert the expansion anchors into
the holes. Place the wall mounting
bracket over the expansion
anchors and tighten the screws
on the bracket.
5. Place the water heater on the wall
mounting bracket using hanger
hooks. Tug downwards on the heater
to ensure that the water heater is
fixed steadily.
Inserting the water heater
into mounting bracket
Thermal
Cutout
Front
Jacket
Back
Jacket
Heating Element
Anode
Tank
Installation Bracket
PUF Insulation
Installation of wall
mounting bracket
Red Cap
* Flexible Hose
Hot Water Tap
Safety Valve
Lever
Discharge Tube
* Flexible Hose
Cold Water Tap
To Drain
Blue Cap
Ceiling
Water
heater
Wall
Fig.1
Plumbing
1. Make necessary plumbing with reference to the installation diagram. (Fig.1)
2. GLEN recommends to use Stainless Steel (SS) Flexible Hoses having a minimum
pressure rating of 8 Bar and hoses should be compatible for hot water applications.
3. Connect the cold water pipe to the inlet (Blue Cap).
Relief Valve
Remote &
Holder Battery
