background image

Instructions for the user

9. INSTALLING THE APPLIANCE

Never use the oven door to lever the oven into place when fitting. Avoid exerting

too much pressure on the oven door when open.

We recommend installing the oven with the help of a second person.
The oven is designed for mounting into any piece of

furniture as long as it is heatresistant.

The adjacent figure shows the general dimensions of the appliance.

5.If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth.This may occur

when the microwave oven is operated under high humidity conditions and in no way indicates malfunction

of the unit.

6.It is occasionally necessary to remove the glass tray for cleaning.Wash the tray in warm sudsy water or in

a dishwasher.

7.The roller ring and oven cavity floor should be cleaned regularly to avoid excessive noise.Simply wipe the

bottom surface of the oven with mild detergent,water or window cleaner and dry.The roller ring may be

washed in mild sudsy water or dish washer.Cooking vapour collect during repeated use but in no way

affect the bottom surface or roller ring wheels.

When removing the roller ring from cavity floor for cleaning,be sure to replace it in the proper position.

8.Remove odors from your oven by combining a cup of water with the juice and skin of one lemon in a

deep microwaveable bowl. Microwave for 5 minutes,wipe thoroughly and dry with a soft cloth.

9.When it becomes necessary to replace the oven light,please consult a dealer to have it replaced.

568-578

568-578

18

Summary of Contents for GL 672 TOUCH





















Reviews: