background image

The hotplate surface is made up of temperature-resistant toughened ceramic glass. 
However  necessary  precautions  in  handling  of  glass  are  very  important.  The 
breakage of glass due to any reason is not covered under guarantee. 

In case of damage, even if this concern only a small tear, disconnect the device 
from the power supply immediately and contact the customer service. 

We recommend not placing any metal kitchen utensils, cookware or pan lids, 
knives or other metal objects on the hotplate. These may heat up when the device 
is turned on.

Place the hot pans in the hob area only. Never place them on the control panel or
the frame as this may result in melting of the plastic frame due to heat in the pan.

Do not place any magnetics objects like credit cards, cassettes etc. on the glass 
surface while the device is in operation.

In order to avoid overheating, do not place any aluminium foil or metal plates on 
the device.

Warning: 

Please do not put the induction cooker on an iron / steel board, while 

operating. Due to electromagnetic reason, the iron / steel board may heat and 
damage the bottom of the induction cooker. 

Do not insert any objects like wires or tools into the ventilation slots. This may 
cause electric shocks.

Do  not  touch  the  hot  surface  of  the  ceramic  field.  Please  note  the  induction 
hotplate  does  not  heat  up  itself  during  cooking,  but  the  temperature  of  the 
cookware heats up the hotplate!

Do not heat up any unopened tins on the induction hotplate. A heated tin could 
explode; therefore remove the lid under all circumstances beforehand. 

If  you  do  not  use  the  device  for  an  extended  period,  we  recommend  you 
disconnect it from the electric outlet.

Never touch the device and the power plug with wet hands.

Do not connect the device to the same outlet with other devices. Connect the 
device to a suitable outlet.

Never move the device by pulling on the power cable.

Do not move the induction hotplate during cooking or with hot cookware on top 
of it.

Never use the device when it does not function properly, shows damage or in case 
it was dropped.

Do not leave the device unsupervised during operation. Keep children and other 
incompetent persons as well as persons under influence of drugs or alcohol away 
from the device.

Safety Precautions

Summary of Contents for GL 3070









Reviews: