Using Your Air Fryer
• Remove all packaging material. Remove any stickers or labels from the appliance.
• Thoroughly clean the basket and pan with hot water, some washing liquid and a non-abrasive sponge. You can
also clean these parts in the dishwasher.
• Wipe the inside and outside of the appliance with a moist cloth.
• Place the appliance on a stable, horizontal and level surface. Do not place the appliance on non-heat-resistant
surfaces.
• Place the basket in the pan properly
Note:
the basket MUST be put into the appliance properly, otherwise the appliance will not work!
• This is an air fryer that works on hot air. Do not fill the pan with oil or frying fat.
• Do not put anything on top of the appliance.
• Do not put anything on the air-inlet on the two sides of the appliance, this disrupts the airflow and affects the hot
air frying result.
Hot air frying
The air fryer can prepare a large range of ingredients. Pease refer to the section “settings” table hereinafter.
• Put the mains plug into an earthed wall socket.
• Carefully pull the pan out of the air fryer.
• Put the ingredients in the basket.
Note:
Never fill the basket in full or exceed the recommended amount (see section ‘Settings’ in this chapter), as
this could affect the quality of the end result.
• Slide the pan back into the air fryer properly.
• Never use the pan without the basket in it.
• If the pan is not fixed into the air fryer properly, the appliance won’t work!
Caution:
Do not touch the pan during frying, as it gets very hot. Hold the pan only by the handle.
• Press the MODE button to set the required temperature. See section ’Settings’ to determine the right temperature.
• Determine the required preparation time for the ingredient (see section ‘Settings’ and press the button TIMER+ or
TIMER- (Max 60 minutes).
• To switch on the appliance, press the ON button, to switch off the appliance, press the OFF button or press the
TIMER- to adjust the time to 00.
Add 3 minutes to the preparation time when the appliance is cold.
Note:
If you want, you can also let the appliance preheat without any ingredients inside. In that case, switch ‘ON’
the unit and set timer to more than 3 minutes and wait until the heating-up light goes out (after approx. 3 minutes).
Then fill the basket and the timer to the required preparation time.
-
The LCD light goes ON.
-
The timer starts counting down the set preparation time.
-
During the hot air frying process, the heating goes ON and OFF from time to time. This indicates that the
heating element is switched ON and OFF to maintain the temperature.
-
Excess oil from the ingredients is collected at the bottom of the pan.
• Some ingredients require shaking halfway through the preparation time (see section ’Settings’). To shake the
ingredients, pull the pan out of the appliance by the handle and shake it. Then slide the pan back into the air fryer
and continue to cook.
Caution:
Do not press the button of the handle during shaking.
