IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
IMPORTANT SAFETY ADVICE
DO NOT
locate the heater immediately above or
below a fixed socket outlet or connection box.
The Heater carries the warning symbol indicating
that it must not be covered.
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or
lack of experience or knowledge if they have been
given supervision or instruction concerning the use
of the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall
not be undertaken by children without supervision.
Children of less than 3 years should be kept away
unless continuously supervised.
Children aged from 3 years and less than 8 years
shall only switch on/off the appliance provided
that it has been placed or installed in its intended
normal operating position and they have been given
supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards
involved.
Children aged from 3 years and less than 8 years
shall not plug in, regulate and clean the appliance
or perform user maintenance.
WARNING:
To avoid danger of suffocation please
remove all packaging materials particularly plastic
and EPS and keep these away from vulnerable
people,children and babies.
WARNING:
To avoid the risk of accidental
strangulation from the supply cord all children and
vulnerable people must be supervised when in the
vicinity of the product whether it is working or not.
CAUTION:
Some parts of this product can become
very hot and cause burns. Particular attention has
to be given where children and vulnerable people
are present.
WARNING:
In order to avoid overheating, do not
cover the heater.
DO NOT
use this heater in the immediate surroundings
of a bath, a shower or a swimming pool.
DO NOT
operate the heater with the mains lead
overhanging the heated surfaces.
ENSURE
that the mains lead cannot be tripped
over.
DO NOT COVER
the appliance or place material or
garments on it, or obstruct the air circulation around
the heater, for example with curtains or furniture, as
this could cause overheating and a fire risk.
Dimensions
H
W
D
(millimetres)
211 815 200
Glen Skirting Heater
Model : 2150N
Model
Specification
2150N
0.5KW with Thermostat
211
230
815
120
Fig. 1
41
WARNING:
Do not use this appliance in a
bathroom
CAUTION:
In order to avoid a hazard due to
inadvertant resetting of the thermal cut-out, this
appliance must not be supplied through an external
switching device, such as a timer, or connected to
a circuit that is regularly switched on and off by the
utility.
IMPORTANT:
If the supply cord is damaged, it must
be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
NEVER
cover or obstruct in any way the heat outlet
slots at the top of the heater or the air inlet slots in
the base of the heater.
DO NOT
use the heater if it has been dropped or
damaged, see our website for advice.
DO NOT
use the heater if it is tipped over. If the
heater is tipped over, unplug it and allow it to cool
before standing it back upright.
DO NOT
use the heater outdoors.
I
MPORTANT:
the wall brackets supplied with the
appliance must be used if wall-mounted.
WARNING:
Servicing and product repairs
should only be undertaken by the manufacturer’s
approved service agent or a similarly qualified
person, using only exact manufacturer approved
parts.
ELECTRICAL CONNECTION
WARNING: THIS APPLIANCE MUST BE EARTHED
This heater must be used on an A.C. ~ supply only and the
voltage marked on the heater must correspond to the supply
voltage. This heater is fitted with a rewireable plug incorporating
a 13 amp fuse. In the event of replacing the fuse in the plug
supplied, a 13 amp fuse approved by ASTA to BS 1362 must
be used. If any other type of plug is used, a 15 amp fuse must
be fitted in the plug, the adaptor, or at the distribution board.
IMPORTANT:
If the plug is not suitable for your socket, the 13
amp plug should be removed. Before wiring the appropriate
plug, please note that the wires in this mains lead are coloured
in accordance with the following code:
GREEN AND YELLOW :
EARTH
BLUE
:
NEUTRAL
BROWN
:
LIVE
Connect the
GREEN AND YELLOW
wire to the terminal
marked ‘
E
’ or by the earth symbol
, or coloured
GREEN
or
GREEN AND YELLOW
.
Connect the
BROWN
wire to the terminal marked ‘
L
’ or
coloured
RED
.
Connect the
BLUE
wire to the terminal marked ‘
N
’ or coloured
BLACK.
