Using Your Induction Hob
The Zone Indicator (Timer)
On the timer there are four lights at the corners, these
correspond to you heating zones.
As with the power indicators, these will flash when not
selected and remain static when selected.
Programming a cooking duration
Select the timer key to access the programming function.
The corresponding indicator lights flashes.
Press the ‘+’ key to display the required cooking duration
(max 99 mins)
Press the timer key to confirm the programming
operation.
Multiple programming
It is possible to programme more than one heating zone
at a time.
Simply repeat the above steps on whichever zones you
wish to use.
Note:
The indicator light will remain lit once the duration
has been confirmed.
To see how long a zone has, select the zone you wish to
look at and touch the sensor. The indicator light will
remain lit and the time remaining will show.
An audio signal will sound once the various times have
counted down and the zone will switch itself
off
.
The Power Booster
To use the power booster for rapid heating, touch the
Booster sensor ‘P’, the power indicator will display a P.
The booster function stops after 4 minutes automatical-
ly. While the booster is on the heating zones at the front
of the hob will only reach 600W, this is to prevent over
heating.
The warming zone (if applicable)
To operate the warming zone touch the warming zone
symbol.
The display above will show ‘1’ to indicate that the zone
is active.
Place your pan on top.
To switch off the warming zone, simply touch the
warming zone symbol again.
The display will show ‘H’ - alerting you that it may be hot
to touch with any residual heat.
Alternatively, the zone can be turned off when the power
symbol is touched to turn off the hob.
Note:
The timer starts count-
ing down immediately.
An audio signal sounds
at the end of cooking
time, and the heating
zone switches off.
Press the off key to
switch off the appliance.
i
Note:
Once a further zone is
programmed and
confirmed, that will
remain lit and the
indicator light for the
zone programmed first
will begin to flash.
This is not an error
,
continue with cooking,
or programming.
i
The warming zone:
Ideal for keeping food
warm on an extremely
low heat to prevent
burning.
i
13
