Masport Geneva
2
Owners Installation and Operation Manual
Page 13
Through Roof Framing
Maintain 250mm opening relative to the pitch
of the roof.
250mm square
Use a suitable round or square support
through the roof. Ensure adequate heat
shield protection is provided.
Consult local codes for minimum vent cap height
above the roof, vent must be a minimum 50mm
from any wall.
Termination Above Roof
To prevent water seepage install the flashing
with upper portion slid under the roofing material
and the lower portion over the roofing material.
Note: Do not fasten down until the final
adjustments to the vent have been made.
Installation Instructions
