PG 18
PG 19
Warning!
Never run the dishwasher without the filters in place. When cleaning the filters, don't knock on them. Otherwise, the filters could
be contorted and the performance of dishwasher could be debased.
Cleaning the Spray Arms
It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets and bearings. To remove the
spray arms, screw off the nut clockwise to take out the washer on top of the spray arm and remove the arm. Wash the arms in
soapy and warm water and use a soft brush to clean the jets. Replace them after rinsing thoroughly.
Caring for the Dishwasher
To clean the control panel, use a lightly dampened cloth then dry thoroughly.
To clean the exterior, use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
Protect Against Freezing
If your dishwasher is left in an unheated place during the winter, ask a service technical to:
1. Cut off electrical power to the dishwasher.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain water from the inlet pipe and water valve. (Use a pan to catch the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter in the tub and the bottom and use a sponge to use up water in sump
Cleaning the Door
To clean the edge around the door, you should use only a soft warm, damp rag. To prevent penetration of water into the door lock
and electrical components, do not use a spray cleaner of any kind. Also, never use abrasive cleaners or scouring pads on the outer
surfaces because they will scratch the finish. Some papers towels can also scratch or leave marks on the surface.
Warning!
Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed to
use the abrasive agent or some paper towels because of the risk of scratching or leaving spots on the stainless steel surface.
How to Keep Your Dishwasher in Shape
After Every Wash
After every wash, turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odors are not
trapped inside.
Remove the Plug
Before cleaning or performing maintenance, always remove the plug from the socket. Do not run risks.
No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Use only a cloth and
warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white
vinegar, or a cleaning product made specifically for dishwashers.
When You Go on holiday
When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from
the socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and
prevent odors from forming in the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be positioned on its back.
Seals
One of the factors that cause odors to form in the dishwasher is food that remains
trapped in the seals. Periodic cleaning with a damp sponge will prevent this.
Attention:
The installation of the pipes and electrical equipments
should be done by professionals.
Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the
manual is kept with the machine, so that the new owner may benefit from the advice contained within it.
Please read this instruction manual carefully: it contains important information regarding the safe installation, use and
maintenance of the appliance.
If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.
Positioning and leveling
1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been
damaged, contact the retailer and do not proceed and further with the installation process.
2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the
wall. This appliance can also be recessed under a single worktop (see the Assembly instruction sheet).
8. INSTALLATION
