GLD Products
Tirade MMXI Soccer Table
Item 64-0908
13
1-800-225-7593
www.gldproducts.com
STEP 7 - ASSEMBLE PLAYER RODS
1. Identify the position of the player rods by the number of holes in the rod. The top view
below will help to locate correct positions.
2. Assemble the handles (#19) to the player rods. Find the end of the player rod that has
a hole near the end. Stand the rod with that end up and place the handle (#19) over the
end. Use a mallet to push the handle onto the rod.
3. Insert the end of the player rod (#24, #25 or #26) into the correct bushing on the side of
the table.
Note:
The handles for each color team will be on the same side.
4. Slide a bumper (#21) followed by a washer (#20) onto the rod.
5.
Select the players (#22 or #23) and slide them onto the rod. The "feet" may not have the
same shape on both sides. All players should face the opponents goal.
6. After the last player is on the rod, place a plastic washer (#20) then a bumper (#21) onto
the rod. Push the end of the rod into the second bushing.
Note:
The player rod should spin freely even though the players are not secured in place.
7. Secure the players (#22 or #23) to the player rod using a bolt (#14) and a lock nut (#15).
Tighten to keep the players from moving.
8. Repeat for the remaining player rods. Pay attention to team colors and foot direction.
