GLD Products
Sheffield Foosball Table
Item 64-0930
3
9
5
7
-
5
2
2
-
0
0
8
-
1
8
www.gldproducts.com
STEP 1 - ASSEMBLE GOAL PANELS
1. Locate one of the top rail end pieces (#7). Lay it down with the predrilled screw holes
facing up.
2. Take one of the goal panels (#6) and position the three brackets over the holes in the top
rail end piece.
3. Use three screws (#32) to secure the two pieces together.
4. Repeat for the second goal panel.
STEP 2 - ASSEMBLE THE PLAYING SURFACE
1. Hold one of the side panels (#8) upright. With the help of a second person, hold the
playing surface (#9) in position on top of the supports, playing side up.
2. Line up the screw holes of the playing surface (#9) with the pre-drilled holes of the
supports.
3. Use six screws (#30) to secure the two pieces together.
4. Position the second side panel (#8) on the opposite side of the playing surface (#9). Line
up the screw holes and use six screws (#30) to secure the two pieces together.
5. Turn the assembly over.
6. Position the two support bars (#10) in the gaps of the side supports.
7. Use four screws (#31) to go through the side panels (#8) and into the ends of the support
bars (#10). Tighten the screws.
