GLD Products
Sheffield Foosball Table
Item 64-0930
17
1-800-225-7593
www.gldproducts.com
STEP 11 - INSTALL FIELD RAMPS AND ENTRY CUPS
1. Locate all six pieces of the playing field ramps (#13, 14 and 15). Do not remove the
protective paper. The playing surface should be clean and clear from debris.
2. Position the six pieces on the playing field. This will make you familiar with the location
and fit of each piece.
3. Remove one of the pieces and peel off the protective paper. This will reveal a glue
surface.
4. Carefully lower the piece back into position with the edge against the sidewall and the
glue side against the playing surface.
5. When the ramp is flat against the playing surface, it can be pressed down to lock into
position.
6. Repeat for the remaining five ramps until they are all “glued” in place.
7. Locate one inner ball entry cup (#17) and one outside ball entry cup (#16).
8. Place the outside cup (#16) into the large hole on the side of the table. From the inside of
the table, push the inside entry cup (#17) into the same hole.
9. Rotate the outside cup so the opening is level and facing up. A soccer ball dropped into
this cup will fall onto the playing field.
10. Secure the inside and outside cups with two screws (#35) each.
11. Repeat for the second cup.
