202-INST-US-001 v1.0
–
11 Dec 2020
Need assistance? 833-SKYDOOR (833-759-3667) [email protected]
Page 3 of 25
Introduction
Thank you for purchasing a Glazing Vision Pitchvent. In order to ensure that it gives you many years of service it is important that before
commencing any work you read these instructions fully and ensure that they are strictly followed for a successful and trouble free
installation.
We recommend that the installation should be undertaken by your roofing contractor, Glazing Vision recommends a licensed/registered
contractor in good standing. This will ensure a reliable product and enable the property owner to benefit from a 5 year warranty on the
product. It should be noted that an installation by non-approved installers will result in a reduced warranty period of just 2 years.
By following the correct installation procedure, a reliable and high performing end result is guaranteed. The critical operations that can
lead to problems if not done correctly are the lifting, preparation of the supporting structure, and ensuring that the product is mounted
on the correct pitch with the hinge on the high side. Taking the time to carry out these operations correctly will ensure that the product
does not twist or distort and allow the installed product to move freely and unimpeded with minimum load on the chain actuators and
no undue stresses in the frame or glass.
Care should be taken when working on the product, avoiding accidental damage and ensuring operational reliability.
Should you have any queries beyond this manual please do not hesitate to contact Glazing Vision.
