202-INST-US-001 v1.0
–
11 Dec 2020
Need assistance? 833-SKYDOOR (833-759-3667) [email protected]
Page 15 of 25
Figure 4e
–
Fixing detail (from inside)
Step 5
–
Silicone the Head, Sill and Jambs
Run a continuous thick fillet of silicone (supplied) along the entire length of the head, the sill and both jambs.
Figure 5
–
Head, sill and jambs siliconed
Whilst still wet, excess silicone can be cleaned from the product by spraying on a small amount of soapy water and wiping
with a cloth or paper towel.
Use as many/few
packers as required
Continuous fillet of
silicone around the
product
