29
28
2
Use
Assembly and commissioning
Dispose of packaging materials properly
and keep away from children.
Do not install defective material.
In case of damage, please inform the
transport service provider immediately.
!
1.
Open shade according to
separate instructions
2.
Switch on spot (with the button on the back)
3.
Mount spots
Mounting the spots
1
After 72 hours of non-use, the spot
will automatically go into sleep mode.
Switch on the spotlight using the
button on the back.
!
2.
Switch on the light / Adjust brightness
Press button (start brightness 50%)
Press key several times, each Each press
of the button changes the brightness:
50% > 70% > 100% > 10% > 30%.
3.
Switch off the light
Press and hold the key for one second.
Mount adapter plate and spot only at
locations that do not collide with either
the shade or the fabric.
!
1.
Unpack spots
2.
Check scope of delivery (page 26)
3.
Select suitable rubber band (page 26)
4.
Position adapter plate at suitable
place on sunshade frame
Select direct / indirect lighting
5.
Tighten rubber band
Mounting on the open sunshade
1
1.
Control the light
To control the functions, tap the buttons
several times or keep them pressed down.
direct
indirect
1.4
1.3
1.5
Pairing of additional spots
1.
Remove the spots
2.
Store in a dry place
3.
Close the sunshade according to
the separate instruction manual
Dismantling the spots
3
The adapter plates can remain
mounted on the sunshade when
the lighting is not in use.
!
Load the spots if necessary
!
Charge single spots completely
(approx. 4h) before first use.
!
The remote control remains in pairing
mode for 2 minutes or until the button
is pressed. Repeat step 3 for each
additional OSYRION Spot.
OSYRION Spot can only be paired
with one remote control at a time.
!
Maximum 8 spots per remote control.
!
1
press and hold
press and hold
press
1.3
1.1
1.2
1.4
1.
Prepare the remote control
Press and hold the button for 5 seconds
(control lamp flashes)
2.
Prepare the spot
Press and hold the button for 5 seconds
(spot flashes)
3.
Pairing successful
The Spot shines continuously
4.
Check the pairing
Press the button several times, each
button press changes the brightness
press
press and hold 1 sec.
1.2
1.3
2.2
2.3
