4
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Ice Cream Freezer models are shipped in one carton. These steps should be followed:
1. If legs are included, bolt them to the base with bolts provided.
2. Unwrap power cord.
3. Position unit and level.
4. Plug into 115 volt AC outlet.
5. Your Glastender equipment is now ready for use.
u
ncratIng
anD
s
tart
-u
P
I
nstructIons
D
roP
-I
n
m
oDel
I
nstallatIon
I
nstructIons
INSTALLATION INSTRUCTIONS
DI-FR-DW
DI-FR
NOTE: THIS UNIT REQUIRES PROPER VENTILATION. AIR FLOW RESTRICTIONS AND/OR LACK OF VENTILATION OF CABINET
SPACE WILL CAUSE COMPRESSOR FAILURE AND WILL VOID WARRANTY.
CONDENSER NEEDS 150 CFM OF SUPPLY AIR TO MAINTAIN PROPER OPERATION.
FOR AIR FLOW AROUND ALL SIDES
MINIMUM 5" CLEARANCE
1. Remove angle brackets from drop-in ice
2. Place freezer into appropriate size cut-out
for specific model number used.
3. Replace angle brackets, firmly tighten screws.
4. Place U-channels on top of bolts.
5. Tighten each bolt evenly along U-channels.
6. Seal as necessary.
MINIMUM 5" CLEARANCE
FOR AIR FLOW AROUND
ALL SIDES
MINIMUM 5" CLEARANCE
FOR AIR FLOW AROUND
ALL SIDES
MINIMUM 5" CLEARANCE
FOR AIR FLOW AROUND
ALL SIDES
cream freezer.
DI-FR
DI-FR-DW
DI-FR36
DI-FR36-FL
DI-FR36-DW-FL
DI-FR36-DW
PLAN VIEWS
14" 18"
14"
18"
AIR FLOW
14"
24"
AIR FLOW
COLD
WATER
DRAIN
24"
28"
AIR FLOW
AIR FLOW
24"
34"
COUNTER TOP
COUNTER TOP
18"
14"
CUT-OUT DIMENSION
22-3/4"
X
14-3/4"
CUT-OUT DIMENSION
24-3/4"
X
14-3/4"
CUT-OUT DIMENSION
32-3/4"
X
14-3/4"
CUT-OUT DIMENSION
18"
14-3/4"
X
14-3/4"
COUNTER TOP
SIDE ELEVATION
BOLT
U-CHANNEL
SCREW
AN LE
BRACKET
