Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com
2
Ice Cream Freezer models are shipped in one carton. These steps should be followed:
1. If legs are included, bolt them to the base with bolts provided.
2. Unwrap power cord.
3. Position unit and level.
4. Plug into 115 volt AC outlet.
5. Your Glastender equipment is now ready for use.
u
ncratIng
and
s
tart
-u
p
I
nstructIons
d
rop
-I
n
m
odel
I
nstallatIon
I
nstructIons
FOR AIR FLOW
MINIMUM 5" CLEARANCE
MINIMUM 5" CLEARANCE
FOR AIR FLOW
DI-FR
DI-FR-DW
DI-FR36
DI-FR36-FL
DI-FR36-DW-FL
DI-FR36-DW
PLAN VIEWS
14"
18"
14"
18"
AIR FLOW
14"
24"
AIR FLOW
COLD
WATER
DRAIN
24"
28"
AIR FLOW
AIR FLOW
24"
34"
18"
14"
CUT-OUT DIMENSION
14-3/4" X 14-3/4"
22-3/4" X 14-3/4"
CUT-OUT DIMENSION
24-3/4" X 14-3/4"
CUT-OUT DIMENSION
32-3/4" X 14-3/4"
CUT-OUT DIMENSION
18"
2. Place freezer into appropriate size cut-out
INSTALLATION INSTRUCTIONS
cream freezer.
6. Seal as necessary.
5. Tighten each bolt evenly along U-channels.
4. Place U-channels on top of bolts.
3. Replace angle brackets, firmly tighten screws.
for specific model number used.
1. Remove angle brackets from drop-in ice
NOTE:
COMPRESSOR FAILURE AND VOID WARRANTY.
AIR FLOW RESTRICTION WILL CAUSE
DI-FR
DI-FR-DW
COUNTER TOP
COUNTER TOP
ANGLE
BRACKET
SCREW
U-CHANNEL
BOLT
SIDE ELEVATION
COUNTER TOP
