*
The illustration included in this instruction diagrams the
assembly of the CS-72 Cocktail Station with CCW Rotation
Glasswasher and double overshelves accessory. Assembly
of additional Cocktail Station models is synonymous with
slight variations.
Install 4 legs on
A
Sink, ice and tubing chase section and 4 legs on
B
GT-30 Rotary
Glasswasher using 1/4-20 leg bolts provided.
Attach
E
Trim Rail for Glasswasher to
A
Sink, ice and tubing chase section, using 8-32S/S hex
nut and affixed 8-32x1/2 phillips pan head machine screw into the end of trim rail.
Clip
A
Sink, ice, and tubing chase section to front edge and
E
Trim Rail to the side of
B
GT-30
Rotary Glasswasher.
Utilizing pre-installed
L
End Panel Clip, attach
C
End Panel to back edge of
B
GT-30 Rotary
Glasswasher.
Utilizing pre-installed
K
End Panel Clip, attach Clip
D
End Panel to edge of
A
Sink, ice, and
tubing chase section.
Attach end of
E
Trim Rail to
C
End Panel using affixed screws into
C
End Panel.
Attach ends of
F
Kick Rail to pre-mounted screws on
C
End Panel and
D
End Panel with
screws provided. NOTE: Reference
F
Cross Section illustration for correct placement.
Insert top edge of
I
Front Panel with front side facing out under
A
Sink, ice, and tubing chase
section until
I
pre-mounted clips are able to be placed over the top of
F
Kick Rail. Lower
I
Front Panel until clips engage with
F
Kick Rail. Insert top edge of
J
Front Panel with front side
facing out under
E
Trim Rail until
J
pre-mounted clips are able to be placed over the top or
F
Kick Rail. Lower
J
Front Panel until clips engage with
F
Kick Rail.
Mount
H
Tubing Chase with included screws into pre-punched holes of
A
Sink, ice, and tubing
chase section.
Attach ends of
G
Tray Shelf to
O
and
P
pre-mounted Tray Shelf Clips located on
D
and
C
End
Panels. Screws to mount are affixed in each end of
G
Tray Shelf.
Use affixed screws to attach
N
Overshelf Bracket to the top edges of
C
and
D
End Panels.
Use affixed screws to attach
M
Overshelves to
N
Overshelf Bracket.
Install
Q
Faucet with provided hardware.
Place
R
Wet Waste Strainers in sinks of
A
Sink, ice, and tubing chase section.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Cocktail Station Assembly Instructions
NOTES:
For CW rotation glasswasher, reverse location of
A
and
B
.
Use adjustable feet in legs to level station and glass-
washer to each other.
1.
2.
CS-72-CCW
