J
UMP
-S
TART
F
USELAGE
O
PTION
Steps 69–78
:
No factory work has been completed on these steps; follow the
instructions in the
Manual.
Step 79
:
This step has been partially factory-completed. Some shimming may be
required as called for in the
Manual
.
Step 80
:
This step has been partially factory-completed. Bulkhead E has been
installed, but the drain hole called out in the
Manual
has not been cut. Follow the
instructions in the
Manual
to complete this step.
Steps 81–82.2
:
No factory work has been completed on these steps; follow the
instructions in the
Manual.
Step 83
:
This step has been factory-completed in its entirety.
Step 84
:
This step has been partially factory-completed. Bulkhead A has been
installed, but the drain holes called out in the
Manual
have not been drilled. Follow
the instructions in the
Manual
to complete this step.
Step 85
:
No factory work has been completed on this step; follow the instructions
in the
Manual.
These instructions follow the sequence of steps of “S
ECTION
IX: S
YSTEMS
I
NSTALLATION
” in the
GlaStar Assembly Manual
.
Step 0.1
:
This step has been factory-completed in its entirety.
Step 1-126
:
No factory work has been completed on this step; follow the
instructions in the
Manual.
These instructions follow the sequence of steps of “S
ECTION
X: F
INAL
A
SSEMBLY
” in
the
GlaStar Assembly Manual
.
Step 1-128
:
No factory work has been completed on this step; follow the
instructions in the
Manual.
Step 129
:
Completed at the factory; however, follow the instructions in the
Manual
for setting the final gap between the wing and the fiberglass wing root.
Step 130-134
:
This step has been factory-completed in its entirety.
R
EVISION
:
C
D
ATE
:
1/6/04
P
AGE
:
3