ELECTRICAL WIRING AND OUTLET LOCATION
SWITCH OFF THE ELECTRICAL
SUPPLY TO THE CIRCUIT BEFORE
BEGINNING.
Unit is designed to be installed in a lighting circuit
with a dimmer switch. Pre-wire as shown or run
new wire from the new dimmer switch, which is
dedicated to just this unit’s operation. (120V), 14
Guage AWM).
The new outlet must be planned to the proper
location behind the mirror so that the 90º plug
from the unit installs easily without any tension
on the cord. The extra cord should lay flat within
the recess in the back of the unit.
(See page 5 for Best Location of Outlet)
USE WITH DIMMER SWITCH.
20 A GFCI
BREAKER
Dimmer Switch
Use Single Grounded Outlet
Service Wire
Typical
Vanity
Height
Wall Switch
Mark the
Mirror
Surface Mount
Location
Service Wiring
from
dimmer switch
to single outlet
This unit’s electrical connection from the
breaker box to the
dimmer switch to the wall outlet must be
made by a Licensed Electrician in a manner
that conforms to the National Electric
Code.
4
Glasscrafters’ products work best with these
recommended dimmer switches:
•Maestro® C•L® Dimmer from LUTRON®, MODEL # MACL -153M
http://www.lutron.com/TechnicalDocumentLibrary/369613a.pdf
•DIVA® C•L ® Dimmer from LUTRON®, MODEL # DVCL -153P
http://www.lutron.com/TechnicalDocumentLibrary/369682.pdf
It is recommended that the dimmer be within reach of your mirror so you can
adjust the brightness.
For on/off (no dimmer) operation, a standard wall switch may be substituted in
place of the the dimmer.
ETL Certified: Conforms to UL 962
SPECIAL NOTE: NEVER use this
appliance with a three prong adapter.
