1
ORBIS EXTENDED POST BRACKET
Installation Guide
IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE
A.
B.
C.
Offer Rear Bracket (
1
) into
position on the post, ensuring it is
in the correct orientation.
Tighten the parallel
Grub Screws (
2*
) to secure
Bracket in place.
Offer Extended Bracket (
3*
) into
position, and feed the Long M8
screws (
4
), with M8 washers (
5
)
through fixture holes from secured
Rear Bracket side.
Ensure that personnel carrying out this installation have the relevant
qualifications/certificates.
Ensure that all relevant personnel read the points listed within this leaflet and
that a copy is given to staff involved with the installation and maintenance of
this product.
Please refer to ‘The Manual Handling Operations Regulations 1992’.
Glasdon recommends that a full Health and Safety analysis is carried out prior
to installation.
!
KIT CONTENTS
1
- Ø40/50/60mm Rear Bracket x1
2
- M6x16 Grub Screws x2 *
3
- Ø40/50/60mm Extension Bracket x1 *
4
- M8 Long Socket Button Screw x4
5
- M8 Washers x8
6
- M8 Nyloc Nut x4
* Extension kit only (for Orbis with Lid)
EQUIPMENT REQUIRED
-
Ø13 Spanner
- 5mm Allen Key
-
Personal Safety Equipment (gloves, safety boots etc.)
2
3
4
5
1
Illustrations are for ‘Extended’ kits (ie Orbis with lift up Lid).
For Orbis without the Lid, Items 2 and 3 are not required or included
ORBIS POST MOUNTING KIT
FOR Ø40/50/60mm POSTS
