ELECTRA
®
BIN
Operator Instruction Leaflet
8.
Press the edges of the bag
over the edge of the sack
bands. Press the rear sack band
downwards to add tension and
secure the sack in place.
Push the sack retention
system back inside the bin.
Close the door and lock the
bin using the triangular key,
turning the key clockwise.
9.
10.
2
To Empty and Replace the Ashtray Liner.
Open the bin
(as shown in
diagrams 1-2) and
remove main bin
liner or pull the
sack retention
forwards. Lift
Ashtray from
brackets and
remove from the
bin.
Empty Ashtray
liner and
replace by
hooking back
onto the
brackets.
To Assemble the Freestanding Base (60L Model)
Place the Free Standing
Base on the ground, with the
pre-fixed screws protruding
upwards.
Place the Electra Litter Bin on
the Free Standing Base and
align holes in the base of the
bin with the four screws.
Secure in position using
the M10 washer [ITEM
3] and M10 Nut [ITEM 4]
and tighten using an M10
Spanner.
Ensure the base is secured
in position and place in an
appropriate location.
ITEM 1
- Free Standing Base Kit
x1
ITEM 2
- M10 Screw
x4
ITEM 3
- M10 Washer
x4
ITEM 4
- M10 Nut
x4
TOOLS REQUIRED
10mm Spanner / Socket x 1
