background image

J:\Std User Instructions\099A PV6, 099APV624_TOUCH VORTEXERS.doc 

06/10/14 

Limited Warranty: 
 

Glas-Col warrants products of its manufacture to be free from defects in material and 
workmanship for one year and agrees to repair or replace without charge any products 
found defective upon examination at the factory. With proper care and operation, Glas-
Col products will give long and efficient service. Chemical spillage, overheating, 
overloading and general misuse will greatly reduce the service life. Glas-Col is not 
responsible for damage to apparatus due to improper installation or through attempts to 
operate the apparatus beyond its rated capacity, intentional or otherwise. Normally 
expendable parts are not covered by this warranty.  
 
In the event of an incident due to a defective replacement component, Glas-Col will 
accept responsibility only if the component was defective from the outset. Glas-Col 
reserves the right to deny responsibility for the incident if the user fails to comply with 
any instructions provided by using spare parts, which are not guaranteed. 
 

APART FROM SUCH WRITTEN STATEMENT OF WARRANTY, THERE ARE 
NO WARRANTIES, EXPRESSED, IMPLIED OR STATUTORY WHICH 
EXTEND BEYOND THE DESCRIPTION OF THE PRODUCTS ON THE FACE 
HEREOF. 

 
Glas-Col products are intended only for legal and legitimate purposes in commercial, 
laboratory and industrial settings. 
 
Glas-Col reserves the right to make product refinements without prior notice. 

 
 
Returns: 

 
Call or fax Customer Service for a Return Goods Authorization (RGA) number before 
returning a Glas-Col product. 
 
Reference the RGA number on the shipping box and on a written description of the 
problem. 
 
 A 20% restock charge of the net price is charged for all standard product returned to 
stock. 
 
 

Glas-Col, LLC 

711 Hulman Street, P.O. Box 2128, Terre Haute, IN 47802-0128 

Phone. (812) 235-6167, Fax. (812) 234-6975 

E-mail: 

[email protected]

 

Web:  

www.glascol.com

 

Summary of Contents for 099A PV6

Page 1: ...oc 1 06 10 14 User Instructions 711 HULMAN STREET PO BOX 2128 TERRE HAUTE IN 47802 812 235 6167 FAX 812 234 6975 OPERATING AND SAFETY INSTRUCTIONS for TOUCH VORTEX TEST TUBE MIXER Model 099A PV6 1 0 amps 120 volts 50 60 Hz 099A PV624 1 5 amps 240 volts 50 60 Hz ...

Page 2: ... be placed at any desirable setting for any mode of operation The modes of operation are listed below POWER SWITCH Continuous On Touch Control Touch Cup When in the touch cup mode the motor starts automatically when the tube depresses the rubber cup Downward pressure is necessary to maintain the vortexing action As the tube is removed and downward pressure is released the motor will automatically ...

Page 3: ...0 vac 10 50 to 60Hz 5 099A PV624 240 vac 10 50 to 60Hz 5 Ambient Temperature 77 o F 25 o C 5 o C Operating Environment 0 to 90 relative humidity 32 to 100 o F 0 to 37 o C Maintenance Glas Col mixers do not require regularly scheduled maintenance However regular inspection is recommended Glas Col mixers should be protected from chemical spillage mechanical damage and corrosive atmospheres so far as...

Page 4: ...y if the component was defective from the outset Glas Col reserves the right to deny responsibility for the incident if the user fails to comply with any instructions provided by using spare parts which are not guaranteed APART FROM SUCH WRITTEN STATEMENT OF WARRANTY THERE ARE NO WARRANTIES EXPRESSED IMPLIED OR STATUTORY WHICH EXTEND BEYOND THE DESCRIPTION OF THE PRODUCTS ON THE FACE HEREOF Glas C...

Reviews: