Touch Screen Driver Installation
The Glancetron GT-15Wide is available with both RS232 and USB connections. The touch
driver is located on the enclosed CD-ROM for these operating systems: Windows
®
7, VISTA
64/32 bits, XP, 2000, ME, 98, NT4.0, CE, XP Embedded, Linux, Apple
®
Mac OS.
Please Note:
The Glancetron GT-15Wide is Microsoft
®
Windows
®
HID (Human Interface
Device) compatible if you use the USB touch screen interface. No additional software driver
is required for general operation of the touch screen. A calibration tool can be installed for
improved touch position accuracy. See “Optional Calibration Tool Install” section for more
information.
Glancetron GT-15Wide Optional Calibration Tool Install:
If you would like to use the Optional Calibration Tool, follow the instructions below. Please
note: the calibration tool supports Windows
®
7, VISTA, XP, XP Embedded, 2000, 98 and
ME operating systems via USB only.
1. Open the CD-ROM.
2. Select Touch Type.
3. Select HID Calibration.
4. The HID calibration tool will automatically open. From here the user can choose to do
the following:
a. 4 Points Calibration
b. 9 Points Linearization
c. 25 Points Linearization
d. Clear
e. Draw Test
f. Advanced. In the Advanced settings area the user may do the following:
I. Adjust the Double Click Area.
II. Enable auto right click and adjust the auto right click time.
III. Choose to be either in the HID Mouse Mode or HID Digitizer Mode
(Windows
®
7, Vista).
IV. Simply click the “Apply” button once the settings are
fi
nalized.
18