Fill-in commisioning and project information given bellow and send it back
to manufacturer.
Steps:
1. Navigation lights controller is installed and connected according manual
2. Turn on power supply and turn on main unit.
3. Check if configuration on controller is in accordance with information regarding lights.
4. Light check:
a) Turn on light.
b) Visually check light for operation
c) Compare position of light on ship with configuration on main unit
d) Turn off light
5. Repeat step 4. for all lights
6. Simulate light failure for some lights by disconnecting light cable or removing bulb.
IMPORTANT!!! Dangerous voltages!!!
7. Check operation of external alarm output contact.
8. Check manual acctivation of some lights by switching them directly on input module.
9. Check NMEA communication with other systems. (if exsisting)
9. APPENDIX
Project information form
OK
Ship name:
IMO no.:
Shipyard:
Hull no.:
Commisioning date:
Company:
Done by:
Navigation and signal lights’ controller ITNSL-01
Main unit type ITNSL-01T
Power supply unit ITNSLP-01
Code
Input unit type ITNL
Input unit type ITNL
Input unit type ITSL
Input unit type ITSL
Serial no.
1
