23
GB
20°C
20°C
Selecting a new cutback temperature setting
When cutback temperature is ongoing,
select the new cutback temperature
you desire by pressing or .
Save the setting by pressing more
than 5 seconds.
When the temperature cutback period ends
At the time the frost-safe period ends,
the comfort temperature setting will
flash to indicate the need for action.
Press any key to make the comfort
temperature display steadily and that
temperature will now continue.
If you do nothing while the display is
flashing, another frost-safe period will
start automatically after 48 hours.
Cancelling a frost-safe period
To end an ongoing frost-safe period,
press for more than 5 seconds.
Calibration
Should the actual room temperature
and the H30’s setting not correspond,
the H30 should be calibrated.
First let the heater work at the same
temperature setting, preferably for
at least 24 hours, keeping doors and
windows closed. This makes certain
that the H30 that is controlling room
temperature.
Hold down on and press once on
Release . ºC will flash 3 times and
the setpoint temperature will flash.
Press or until the display shows
the same as the actual measured room
temperature. Store by pressing for
5 seconds.
The heater will now work with the
temperature displayed by the H30 and
after a period this will correspond
with the actual temperature of the
room. This procedure can be repeated
at a later date to ensure correct cali-
bration.
Reset the thermostat to factory default values
Nb! Reset is not possible if the thermostat display is in any flashing
mode.
After resetting, the thermostat has to
be reprogrammed according to the
instructions for your chosen mode.
Switch the heater OFF.
Hold in the key and then switch the
heater ON.
Hold the key in for more than 5
seconds until rE starts flashing in the
display.
Release and HO (Home Mode) will
flash.
You can select between modes HO, OF
(Office) and CA (Cabin) by pressing
the or keys.
Confirm your choice by pressing the
key for more than 5 seconds.
22 (°C) will flash. Select your pre-
ferred comfort temperature.
Confirm by pressing in the key for
more than 5 seconds.
If you do nothing, 22 (°C) will auto-
matically be stored after 7 seconds.
Child lock
To lock: Press and at the same
time until you see - - in the display.
To unlock: Press and at the same
time until you see - - disappear in the
display.
