29
GB/AU
20°C
x2
20°C
Temperature override
If you select another temperature
during either a comfort or a cutback
period, and do not save (by pressing
for five seconds), the new temperature
will apply only to the current period.
To select a new cutback temperature setting
While cutback temperature is ongoing,
choose the desired new cutback tem-
perature by pressing or . Save
the setting by pressing more than
five seconds.
Permanently delete cutback function
To permanently delete a temperature
cutback function, press or until
the green lamp goes out.
Child lock
To lock: Press and at the same
time until you see - - in the display.
To unlock: Press and at the same
time until you see - - disappear in the
display.
Calibration
Should the actual room temperature
and Neo’s setting not correspond, Neo
should be calibrated.
First let the thermostat work at the
same temperature setting, preferably
for at least 24 hours, keeping doors
and windows closed. This makes cer-
tain that Neo that is controlling room
temperature.
Hold down on and press once on
. Release . ºC will flash 3 times
and the setpoint temperature will
flash. Press or until the display
shows the same as the actual measured
room temperature. Store by pressing
for 5 seconds.
The thermostat will now work with the
temperature displayed by Neo and
after a period this will correspond
with the actual temperature of the
room. This procedure can be repeated
at a later date to ensure correct
calibration.
Reset the thermostat to factory default values
Nb! Reset is not possible if the thermostat display is in any flashing
mode.
After resetting, the thermostat has to
be reprogrammed according to the
instructions for your chosen mode.
Switch the heater OFF.
Hold in the key and then switch the
heater ON.
Hold the key in for more than 5
seconds until rE starts flashing in the
display.
Release and HO (Home Mode) will
flash.
You can select between modes HO, OF
(Office) and CA (Cabin) by pressing
the or keys.
Confirm your choice by pressing the
key for more than 5 seconds.
22 (°C) will flash. Select your pre-
ferred comfort temperature.
Confirm by pressing in the key for
more than 5 seconds.
If you do nothing, 22 (°C) will auto-
matically be stored after 7 seconds.
Change the duration of temperature cutback
and/or the cutback temperature
Hold down on and press twice on
or . Release and h (hours) will
flash 3 times.
Using the or key select the
number of hours you want the cutback
to last.
Confirm by pressing key briefly.
°C will flash 3 times and then the cur-
rent cutback temperature will flash.
With or key select the cutback
temperature.
Confirm by pressing key briefly.
d (day) will be displayed for three
seconds, and afterwards a random
number.
Using the and keys, select the
correct weekday (Monday = 1 etc.).
Press briefly to confirm.
