5
HEAVY DUTY RACK GEARTRACK
®
PACK
INSTALLATION INSTRUCTIONS
Heavy Duty Rack GearTrack
®
Pack Use Requirements
■
Maximum weight limit is 75 lbs (34 Kg) per linear ft (30.48 cm)
for Rack GearTrack
®
Channels.
■
Do not use the hanging cabinets or wall GearBoxes on the
Rack GearTrack
®
. This GearTrack
®
is only intended for any
hook with a maximum claim load of 50lbs.
Unpack
■
Remove all parts from their packaging, and dispose of/recycle
all packaging materials.
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
■
Phillips Head Screwdriver
■
Drill and 3/32" drill bit
Parts Supplied
■
2 screws
INSTALL THE HEAVY DUTY RACK GEARTRACK
®
PACK
LH
RH
2a.
Install GearTrack
®
Channels
(for model 24")
1.
Hand brackets in desired position
■
Install provided end caps on each side of the GearTrack
®
Channel.
■
Put Left and Right Hand brackets in desired position on
the end of your 24" (60.9 cm) or 18" (45.7 cm) deep rack.
(use the following # for rack models - GARS774XEG,
GARS604TEG, GARS484TEG)
3.
Install Ends Caps
■
Install GearTrack
®
Channels into the side of one bracket and
then sliding through to other bracket.
■
Ensure that the ends of the GearTrack
®
Channels are level
with the ends of the rack.
GearTrack
®
Channel is provided at 24" (60.9 cm) length, but can
be cut to size for the 18" (45.7 cm) deep rack. If necessary, cut
the channel to length, making sure the cut is square.
2b.
Install GearTrack
®
Channels
(for model 18")
LH
RH
18"
06-Feb-2019 12:25:10 EST | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
