8
iMPOrTanT:
Drain approximately 4 glasses of water from each tap before initial use. This does not need to be done with replacement
bottles.
1
Dispensing cold water
□
Place a glass under the spigot.
□
Press the cold water dispensing button (E) until the desired amount
of water is dispensed.
□
When the blue LED light (L) illuminates, the cold water has reached
optimum temperature (compressor is off).
□
When the blue LED light (L) is off, the cooling cycle is active (compressor
is on).
2
Dispensing hot water
To prevent hot water from being dispensed accidentally and possibly harming
a child, the hot water dispensing button can only be operated when the child
resistant safety feature is activated.
□
Place a glass under the spigot.
□
While holding down the red child safety lock (C), press the hot water
button (D) until the desired amount of water is dispensed.
□
Release the hot water dispensing button, and the child safety lock (C)
will re-engage (locks) automatically.
□
When the red LED light (L) illuminates, the hot water has reached
optimum temperature (heater is off).
□
When the red LED light (L) is off, the hot water heating cycle is active
(heater is on).
Operation
C
WarninG:
The hot water is heated to approximately 194˚F / 90˚C. Temperatures above 125˚F / 52˚C can cause severe burns from scalding.
DO NOT ALLOW CHILDREN TO USE THE HOT WATER DISPENSING BUTTON WITHOUT PROPER AND DIRECT SUPERVISION.
E
D
C
L
