Glacier bay VDR3322A0, Use And Care Manual

Page: 6 / 12

4
□ Shut off the water supply.
□
Insert the faucet body through the hole in the
sink.
5
Securing the faucet assembly
□ From underneath the sink, secure the faucet
assembly to the sink with the FastMount™
system (B). Push the FastMount™ system (B)
up over the threads until it stops against the
bottom of the sink, then hand turn (clockwise)
to tighten (Fig 1).
Installing the faucet assembly
Sink
Sink
Push
up
Screw
Fig 1
B
B
A
B
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
7
Installing the weight
□ Insert the weight (D) onto the clip (E) by sliding
it down onto the clip (E).
□
Install the weight clip (E) at the point of the
hose marking “weight here”.
6
Attaching the quick connector
to the receiving block
□
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
1
C
Weight
here
Weight
here
E
D
E
D