background image

5

10

Undermount-Installation

Installing the sink

Installing the countertop

NOTICE:

 The front sink apron must be secured to the front of the 

cabinet by attaching fasteners through the cabinet front and into the 
support framing. Failure of the step can lead to product damage.

NOTICE:

  Metal edges may be sharp - use caution when handling.

NOTICE: 

 The manufacturer is not responsible for the sink or the 

countertop if damaged during installation. Be sure to inspect the sink 
for damage prior to beginning installation.

Clean the sink apron and top rim of all debris. Ensure that the 
surface on the underside of the countertop cutout opening is 
smooth and free of debris.
Lower the sink (A) onto the supports and verify the sink is 
supported by the frame.

Push the sink in to ensure the apron is flush to the front of the 
cabinet.

Verify the sink is level. Make any adjustments and shim as 
needed.

Clean the bottom of the countertop and the top flange (or lip) of
the sink with denatured alcohol.

Apply a narrow bead of silicone adhesive sealant (not included) 
around the side and back of the sink (A). 

Carefully position and secure the sink to the countertop following
the manufacturer’s instructions.
Apply a thin bead of silicone sealant (not included) where the 
sink meets the countertop and cabinet.
Immediately remove excess sealant.

Recommended

Clip Placement

Countertop

Silicone caulk

(Not included)

AA

A

A

AA

Summary of Contents for ACS3021A1Q














Reviews: