8
Installation (continued)
7
Attaching the quick connector
to the receiving block
□
Push the quick connector (I) firmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
□
If it is necessary to remove the quick connector
(I), squeeze the tabs on the hose and then pull
down to disconnect.
8
Installing the soap dispenser
□
Insert the body assembly (L) through the
selected hole in the sink. Secure the body
assembly (L) to the sink with the nut (M).
□
After connecting the hose, install the weights (J)
at the lowest point of the hose.
□
From under the sink, screw the bottle (N) onto
the body assembly (L) shank. Insert the pump
(K) down into the body assembly (L).
L
M
N
K
I
1
J
Weights
here
Weights
here
