6
Installation (continued)
3
Installing the escutcheon
□
Screw the bolts (G) into the escutcheon (E) and
ensure that the base plate (F) is pressed onto
the escutcheon (E) before the escutcheon (E)
is installed over the three holes in the sink.
□
From underneath sink, hand tighten the
mounting nuts (H). Do not overtighten.
4
Installing the faucet assembly
NOTE:
Do not feed the hose (1) back down through the
spout until step 6.
□
Retract the hose (1) up through the faucet body,
until the hose fitting is flush with the bottom of
the shank (2). Do not pull the hose fitting past
the shank.
□
Insert the faucet assembly (A) through the hole
in the escutcheon (E).
NOTE:
If the sink is uneven, use silicone under the base
plate (F).
NOTE:
This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
NOTE:
This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
G
E
F
H
2
A
1
E
