Determining the mounting
location
Installing the bracket in a
wood stud
Installing the bracket in
drywall
Determine the location where you wish to install
your accessory.
Align the mounting brackets (BB) with pilot holes
and secure with the mounting screws (CC).
Drill a 3/32 in. pilot hole at each pencil mark made.
Align the mounting brackets (BB) with the E-Z
Ancor® (AA) and secure with the mounting
screws (CC).
Place the mounting bracket (BB) at the desired
location and mark the installation holes using a
pencil.
Drill a 1/8 in. pilot hole at each pencil mark made.
Drive the E-Z Ancor® (AA) into the wall using a
Phillips screwdriver until flush with the wall.
Installation
1
3
2
BB
BB
AA
CC
NOTE:
To install the bracket in a wood stud, proceed to
Step 3. To install the bracket in ceramic tile, proceed
to Step 4.
BB
AA
CC
4
