4
Installation
A
P
C
1
2
Shut off the water supply. Remove the old faucet.
Ensure the gasket (P) is on the bottom of the new
faucet (A).
Place the faucet (A) through the mounting holes in
the sink.
Clean off the mounting surface.
Secure the faucet (A) to the sink using the mounting
nuts (C) provided.
1
CAUTION:
Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE:
If the sink is uneven, use silicone under the
gasket (P).
Installing the faucet assembly
Preparing the pop-up assembly
2
H
D
E
F
G
Remove the pop up stopper (H) and drain flange (D)
from the drain body (G).
Screw the lock nut (F) all the way down, and push
the rubber washer (E) down.
