8
Installation (continued)
5
Installing vanity Cabinet
NOTE:
Clean area where the vanity (A) will be permanently located prior to beginning installation, ensuring the vanity (A) will not
interfere with any water supply and drain lines once mounted.
□
With two people, carefully place vanity (A) against the wall in its final location. Place a level on the unit in both directions, across
the front and on both sides to properly adjust the levelers on the unit. Use preassembled levelers on feet of vanity (A) to level the
item. Twisting the levelers counterclockwise will increase the height of vanity (A), twisting them clockwise will decrease it.
□
Find and mark locations of wall studs behind the permanent location of vanity (A). From inside vanity (A), drill hole through vanity
mounting area into wall studs.
□
Using mounting hardware (not included) appropriate for your installation site, secure vanity (A) to wall stud. If possible, secure
vanity (A) to two wall studs for increased stability.
WARNING:
□
Vanity (A)
MUST
be secured to wall studs.
1
2
A
Vanity
Mounting
Area