9
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation – [Floor-standing unit]
Attaching the hairpin legs
1
Attaching the felt pad
2
□
Install each hairpin leg matching each corner of the leg into each
corner of the vanity. Provide sufficient protection on the floor to
protect the vanity from damage.
□
Tilt the vanity backwards and position the hairpin legs, aligned over
the pre-drilled holes (refer the image). Attach hairpin legs to the vanity
using the provided leg screws (E). Evenly position the screws with
vanity base pre-drilled holes.
□
Ensure all the screws are tightened properly. With assistance, turn the
vanity upright to rest on its legs.
□
Place the vanity base on the desired location and mark the felt pad location on the floor. Remove the vanity and stick the hairpin
leg felt pad to the floor. Place the vanity on the felt pad.
E
NOTE
: Crawley hairpin legs not included with
this pack. Buy separately.
