Problem
Possible Cause
Corrective Action
Vanity drawers rub against another surface.
Wall is not level.
□
Adjust the drawer slides.
There is an uneven gap between the
drawers and cabinet.
Wall is not level.
□
Adjust the drawer slides.
Vanity top wobbles when placed on the
vanity base.
□
The vanity base is not installed level
and plumb.
□
The underside of the vanity top is
uneven. This can be a common
occurrence in porcelain tops due to
the manufacturing process.
1) Ensure the vanity base is level and plumb. It
may be necessary to use shims if the base
sits uneven (see Planning Assembly section).
2a) Identify which corners have the wobble.
2b) Carefully remove the vanity top and turn
it over.
2c) Apply the bumpers (C) adhesive side down
on the corners of the vanity top that you
identified in Step 2a.
2d) Carefully place the top back onto the
vanity base and make any necessary
adjustments to the bumper placement(s)
until the vanity top does not wobble.
Troubleshooting
C
C
12
