10
Installation (continued)
□
Place the porcelain top (B) centered on the vanity base (A).
For additional stability, clear silicone may be used to secure
the porcelain top onto the vanity base.
□
Connect the faucet and drain (not included) as per the
instruction sheets provided with those items and ensure
that there is no leakage.
□
Please wipe clean excess silicone squeeze out after the
usage.
□
After installing the vanity top please adjust the drawer
slides if required.
Attaching the vanity top
4
NOTE
: For instructions on how to use the provided
bumpers (C), see the Troubleshooting section of this
document.
□
Place the vanity (A) in the desired position taking into
account the location of your plumbing.
□
Ensure the vanity (A) is level front to back and at both sides.
□
Secure the vanity (A) to the wall by inserting two #8 x 2 in.
screws (not included) through the back rail of the vanity.
CAUTION
: For wall stud installation, insert the screws with
washers into the stud locations (not included).
For drywall installation, drill holes at the appropriate
locations and insert toggle bolts with washers (not included).
For concrete wall installation, drill 1/4 in. holes at the
appropriate locations and insert wall anchors, followed by
the screws (not included).
Securing the vanity to the wall
3
Silicone
A
B
A