GL-INET Beryl GL-MT1300, User Manual

Page: 19 / 157

Page 14 | 152
After plugging in your device, the Tethering section will update and your device
will be shown on the device list. The device name will begin with
eth or usb such
as eth2 , usb0 . Choose your device and click
Connect
.
EasyTether
Some carriers prohibit the sharing of the data so that you may not be able to use
tethering. However, you can try
easytethering .
Note: Easytether is not a free service and we have no affiliation with them.
3. WIRELESS
In WIRELESS, you can check the current status and change the settings of the
wireless network created by the router. The wireless network can be turned on or
off by switching the ON/OFF button. Also you can enable Guest Wi-Fi(disable
default) to provide internet services to your visitors.
Wi-Fi Name (SSID): The name of the Wi-Fi. It is not suggested to use unicode
characters such as Chinese.
Wi-Fi Security: The encryption method of the Wi-Fi.
Wi-Fi Key: The password of the Wi-Fi, which must be at least 6 characters long.
We suggest you to change it when you receive the router.
SSID Visibility: Show/hide the Wi-Fi SSID.
Wi-Fi Mode: The protocol of the Wi-Fi. It is suggested to use default settings
(2.4GHz is b/g/n, 5GHz is a/n/ac).
Bandwidth: The channel frequency coverage range of the Wi-Fi. It is suggested
to use default parameter.
Channel: The router will not choose the best channel itself. You need to choose
a channel manually. If your router is used as a Wi-Fi repeater, the channel will be
fixed according to the connected wireless network.