GL-INET Beryl GL-MT1300 User Manual Download Page 121

Page: 121 / 157

Page 116 | 152

If you don't want to upgrade, please read below.

Free Tor firmware for all

!!! Note

This Tor firmware is totally free and no warranty.

Refer to the forum for help!

To use the Tor firmware:

1. Download the correct firmware for your router.

2. Flash it to the router, DO NOT reserve settings.

If you brick your router after flashing the wrong firmware or wrong way, please
use uboot failsafe to debrick the router.

Versions and supported devices

We have several version of Tor firmware and here is the summary.

Version 2.264:

We have upgrade Tor firmware for the following models to v2.264 on 2017-11-
24.

AR150, AR300M, AR300M Nand, MT300N, MT300A, MT300N-V2

Summary of Contents for Beryl GL-MT1300






























































































































































Search results

Summary of Contents for Beryl GL-MT1300

Reviews:

Related manuals for Beryl GL-MT1300

Brands by name

Popular brands

GL-INET Beryl GL-MT1300, User Manual

Search results

Summary of Contents for Beryl GL-MT1300

Reviews:

Related manuals for Beryl GL-MT1300

Brands by name

Popular brands