GKS F-ROBOT, Operating Instructions Manual, Page: 5 / 15

Seite 5 / 15
SPECIAL SAFETY INFORMATIONS
OPERATIONAL STEPS
SPECIAL SAFETY INFORMATION
OPERATING STEPS
Observe the section entitled "Control"! (Page 17)
LOADING
(Figure A / B)

Determine the weight of the load

Choose a suitable toe jack
We recommend our GKS-PERFEKT hydraulic jacks

Set the fixed dolly to the necessary distance

Raise the heavy cargo at the back and supporting

Push the movable transport dolly (nondriven) under
the material to be lifted.
Do
not reach under the suspended load!
The supporting plates of the dollies must not protrude
over the edges of the heavy cargo.

Place the heavy cargo on slowly and not in a shocklike
way

If the floor is uneven, secure the dollies from rolling
away before placing the next toe jack in position

Raise the heavy cargo at the front

Push the steering dolly under the material to be lifted.
Do
not reach under the suspended load!
You must push the steering dollies swivel top in the
centre below the heavy cargo.
A
OPERATING INSTRUCTIONS NO.04/13 FOR REMOTE-CONTROLLED, BATTERY-OPERATED
TRANSPORT SYSTEM
ROBOT 20
right
left
B
Direction of travel