5 / 5
September 2013 Rev 4
Learning to control panels
When the control panel is in learn mode press the detector
programme button once. After about 10 seconds the wireless
detector will be learnt on to the control panel.
Walk test
In walk test mode, the detection LED option is set to ‘ON’ and
the detection LED will illuminate on detection.
To enter the walk test mode, press the programming button
once. The unit can now be aligned.
Walk test mode ends automatically five minutes after the last
detection.
Do not conduct walk tests with the cover removed.
The range of the detector increases without the protective front
cover. Therefore the front cover must be fitted to establish the
correct beam pattern. Adjust the range as necessary. Pan and
tilt the detector module over the field of view to obtain the
correct coverage.
Specifications
Detection range
Programmable: 10, 20 or 40m
Coverage
Two Fresnel lenses giving up to 40 x 4m
(Lens 2) or 40 x 8m (Lens 1 standard)
Adjustment
180° pan, 90° tilt
Optics
Double silicon shielded quad element
eliminates 50,000 Lux of white light
LED
Red alarm
Batteries
2x 3 V CR123
Current
50
µ
A
Pulse count
1 or 2
Control
Digital micro. with non-volatile memory
Walk test
Output test mode with LED indication
Operating temperature
−
25 to +65°C
Housing
High impact ABS plastic with HDPE cover,
UV stabilised
Dimensions W x H x D
145 x 145 x 120mm
Weight
268g Net, 425g Gross
Mounting height
Maximum height 3 meters for wide angle
Lens 1 (standard) and 2.6 meters for narrow
angle Lens 2
Compliance
Manufacturer
GJD Manufacturing Limited, Unit 2, Birch Business
Park, Whittle Lane, Heywood, Lancashire, OL10
2SX, UK
Certification
R&TTE
This device is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Environmental
class
IP65
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For
more information see: www.recyclethis.info.
Contact information
Web: www.gjd.co.uk
Tel: +44(0) 1706 363 998
Email: [email protected]
