22/06/2010 MT04_A30_B_VI110L_GIVI_ENG REV.B
7
32
SENSOR MOUNTING
- Proceed to fix magnetic sensor using the M4 threaded holes.
- As an alternative you can use them as passing holes for socket head cap
M3x18 screws.
The sensor can be mounted in any position, keeping the active side,
marked by arrows, toward the surface of magnetic strip. Once mounting is
carried, place cables and move manually the sensor for the total run, in
order to be sure it can freely slide without any obstacle.
Check that aligning tolerances between sensor and magnetic strip are
respected along the whole run. Each positioning error must be corrected.
Dimensions of any brackets or supporting arms have to be conveniently
calculated; any kind of their bending must be avoided.
