GivEnergy 3600HY, User Manual, Page: 13 / 37

13
Do not remove the casing until at least 5 minutes after disconnecting all
power sources.
Ø Although designed to meet all safety requirements, some parts and surfaces
of Inverter are still hot during operation. To reduce the risk of injury, do not
touch the heat sink at the back of the PV-Inverter or nearby surfaces while
Inverter is operating.
5.2 Selecting the installation location
Ø
This is guidance for installer to choose a suitable installation location, to
avoid potential damages to device and operators.
Ø Raintight or wet location hubs that comply with the requirements mentioned
in this installation manual are permitted.
Ø The unit shall be mounted at least 914 mm (3 feet) above the ground.
Ø
The installation location must be suitable for the inverter's weight and
dimensions for a long period time.
Ø Select the installation location so that the status display can be easily viewed.
Ø Do not install the inverter on structures constructed of flammable materials.
Ø The humidity of the installation location should be 0~95% without
condensation.
Ø
The installation location must safely accessible to get at all times.
Ø Vertically installation or tilted backwards by max. 15°. and make sure the
connection of inverter must be downwards. Never install horizontal and avoids
forward and sideways tilt.
Ø Be sure that the inverter is out of the children’s reach.
Ø
Don’t put any things on the inverter. Do not cover the inverter.
Ø Do not install the inverter near television antenna or any other antennas,
antenna cables.
Ø Inverter requires adequate cooling space. Providing better ventilation for the
inverter to ensure the heat escape adequately. The ambient temperature should
be below 40°C to ensur e optimum operation. Please make sure the inverter is
installed at the right place
，